Select Page

How to show hidden folders

The default location for Acarda Outbound log files, databases, messages, recordings and settings is in the folder C:\ProgramData\Acarda\Acarda Outbound\. For example, databases are located in C:\ProgramData\Acarda\Acarda Outbound\Data\. That folder should be included in your backups. Another example is the log files. These are located, by default, in C:\ProgramData\Acarda\Acarda Outbound\Logs.

If you look for these folders you may find them to be hidden as Windows usually hides C:\ProgramData\ because the files are usually only used by your applications. This blog will explain how to get to these folders and how to show hidden folders.

First of all if you open up a Windows Explorer viewer or just open up Computer (My Computer) where you can see the hard disks drives listed you should be able to just type in (or copy and paste) the folder address e.g. “C:\ProgramData\Acarda\Acarda Outbound\Logs\” and it should open up.

Alternatively to show hidden folders take the following steps:

1. View the C Drive folders and files


2. Click on Organize then in the menu, click on Folder and Search options.

3. Next in then View tab select “Show hidden files and folders”


Now when you look at C Drive folders you should see the C:\ProgramData\ folder.

How to dial out with AltiGen

There are two methods for Acarda Outbound to dial out with the AltiGen phone system. The first is via the AltiGen MaxAgent softphone and the second, is directly with the AltiGen Phone System through AltiGen’s SDK. This blog will explain how to configure Acarda Outbound for each of these two approaches.

These instructions apply to both the Team and Solo Editions of Acarda Outbound. For Acarda Outbound Team: In Acarda Outbound Agent click on the Tools menu up the top right side of the screen and select the Dialing Device submenu. For Acarda Outbound Solo: Click on the Agent View tab and in the top right, click the Tools menu and select the Dialing Device submenu.

AltiGen MaxAgent Softphone

Dialing out via the MaxAgent softphone does not require the AltiGen edition of Acarda Outbound. AltiGen’s MaxAgent must be installed, running and logged in before continuing. Select AltiGen MaxAgent from the drop down list and click the Test Connection button. You should see feedback on screen saying that the connection was successful. Click Save to select this option and close the Dialing Device screen.


Figure 1: The AltiGen MaxAgent dialing device selection.

AltiGen Phone System through AltiGen’s SDK

Dialing out directly with the AltiGen Phone System is only available in the Acarda Outbound – AltiGen Edition from an authorized AltiGen Reseller Partner. This is a much tighter integration and requires an AltiGen SDK license (Client Application SDK Session License). The advantages of this approach include the ability to dial out with both physical desktop phones connected to the AltiGen Phone System in addition to the MaxAgent softphone, being able to set the outgoing caller ID number, optional do not disturb mode, and a greater level of line status detail. This is our recommended way to dial out with an AltiGen phone system.


Figure 2: The AltiGen Phone System dialing device selection.

When you select the AltiGen Phone System for the dialing device you need to enter the phone system’s server address. If you want to prevent inbound calls being sent to this extension then check the Do Not Disturb Mode check box. There are three login options: The first, Prompt, will ask you to provide login details every time you start Acarda Outbound Agent, the second, System, will save the extension and password for any Acarda Outbound username, the third, User, will save the extension and password on a per user bases so each user logged into Acarda Outbound can have a different extension and password set. These settings are saved onto the Agent station only – you will need to reconfigure your login if you change Agent computers.

For more details on Acarda Outbound please see You can download an Acarda Outbound trial via

How to dial out with 3CX IP-PBX phone system

2017-10-03 edited: Note the HTTP API is no longer available in the latest versions of 3CX, please refer to How to dial out with 3CXPhone for Windows.

This blog will explain how to connect up Acarda Outbound Agent to dial out with 3CX’s IP-PBX. Acarda Outbound can dial out via phone systems that support RESTful API’s and HTTP URL’s; and so with 3CX’s IP-PBX it dials via their HTTP API.

These instructions apply to both the Team and Solo Editions of Acarda Outbound. For Acarda Outbound Team: In Acarda Outbound Agent click on the Tools menu up the top right side of the screen and select the Dialing Device submenu. For Acarda Outbound Solo: Click on the Agent View tab and in the top right, click the Tools menu and select the Dialing Device submenu.


Figure 1: The dialing device configuration.

Once you have selected the dialing device menu from the drop-down, you will be presented with the dialog above. You can then select the “HTTP/Web API” from the current dialing device drop-down to use this dialing method.

The HTTP/Web API only supports commands for dialing a telephone number and for hanging up. Not all systems support the ability to end a call via an API. If your system does not support this then leave the hang up address box blank and it will not be used. You will not be able to use our software to hang up – but you should be able to use the phone systems’ phone or proprietary software to hang up.


Figure 2: The HTTP/Web API configuration.

In the Command URLs you are able to set the URL to be requested as well as the HTTP request method (either GET or POST). Most APIs will use the “Get” verb. The dial setting above also treats the [ph] text in the URL as a placeholder for the telephone number needing to be dialed via Acarda Outbound. Other parameters used in the URL should be set according to the phone system’s documentation. In the case of 3CX’s phone system, the URL would look like the one below:


Where the <pbx> is the IP address of the phone system computer, <ext> is the extension number of the device and <ext pin> is the extensions password. The request verb for this would be GET.

Note: Some phone systems will only accept calls to their respective API’s from the local network. This is for security purposes (and applies to 3cx systems). Often this configuration can be changed but you must understand the potential security risks in doing so.

To read up more on 3CX’s integration with HTTP API please refer to their blog at

For more details on Acarda Outbound please see You can download an Acarda Outbound trial via

How to send template emails using the Mandrill Add-on

You can send template emails directly from the Acarda Outbound agent screen by using the Mandrill Add-on which can be downloaded via the Acarda Outbound download page on our website. This can be used in both Acarda Outbound Team and Acarda Outbound Solo; however, it is only supported in the advanced edition. You can find more about Acarda Outbound on our website:

• Acarda Outbound Team for more than one agent making outbound calls together:

• Acarda Outbound Solo for a single agent making outbound calls:

This blog explains how to use the Mandrill Add-on in Acarda Outbound to send template emails, how to install the Mandrill Add-on and then how to set up a template email in your Mandrill account.


Once a Dial Card is displayed on screen the agent may select to send a template email by clicking on the Action button then selecting “Send Mandrill Email”. There are two fields in the Dial Card that must be populated in order to send an email out. These are:

1. The email address to send the email to (diaEmail).

2. The Mandrill template name or template slug, for example, you could use diaList10. This could be pre-loaded into the campaign data and hidden to the agent. Alternatively, you could give the agent the option to select from several templates, the template names loaded into the diaList10 field via Support Tables. This field is set with the configure utility.


In addition to these you would want to also populate any Dial Card fields you wish to use in the template email mail merge.


Once you click the Send Mandrill Email link the Dial Card data will be sent through to your Mandrill account and the email will be sent using the template you have selected to the Dial Card email address.

Installing and Configuring the Acarda Outbound Mandrill Add-on

The Mandrill Add-on can be installed by running the Mandrill Add-on install disk. First ensure that you have Acarda Outbound installed. The add-on requires the Microsoft .Net4 Framework and the installer should ask permission to install it if it is not detected on your computer.

To configure the add-on run the Acarda Mandrill Add-on Settings utility which you should be able to see as a menu item in either All Programs or under the Acarda Outbound folder in All Programs.


You will see the following settings dialog open up:


Your Mandrill API Key must be entered to link up your Mandrill add-on with your Mandrill account. Next check the field names that you wish to use in your Mandrill email template. It is okay to check field names that you do not end up using but if you do not check them, then the data will not be sent to Mandrill. For example, you may want to check the diaFirstName and the diaLastName fields.

Select the Template Name Field. This is the source where the add-on will get the name of the Mandrill email template you wish to use. We suggest using diaList10 but you can use any text field.

In order to test the email template you can check the Test Mode and complete the box next to it with the email address for the test email. This will become the email address the test email is sent to and the one stated in the Dial Card will be ignored. Next click the Save button and click Close.

Setting up your Mandrill account

You can sign up for a Mandrill account at Once signed up login and set up an email template via the Outbound icon in the left sidebar then click on the Templates menu at the top of the page.


Please refer to Mandrill’s website for details on how to create a template, however, in summary take the following steps:

1. Click on the “Create a Template” button.

2. Choose a name for your template e.g. “New Customer”. This is the name that you will refer to in Acarda Outbound as the template name to use for the email. Click on the “Start Coding” button.

3. The main setup page for the template will now be displayed. Note the Template Slug box under the Name. This is set automatically and cannot be changed. You can refer to this slug in Acarda Outbound as the template to use rather than the template Name if you prefer.

4. You should set the “From Address”, “From Name” and “Subject” defaults for the template.

5. Prepare the text of the email you wish to send out and then add to it the merge fields. Acarda Outbound can send the data fields in the Dial Card to Mandrill. You must use the Acarda Outbound database field names which you will see listed when you configure the Mandrill Add-on. When you add a merge field you must use the format *|{merge field name}|* where {merge field name} is the name of the Dial Card database field name. For example to have the diaFirstName data inserted put *|diaFirstName|*

6. When you create your template you should add the content under both the HTML tab and also the Text tab. Don’t forget to Save and Publish the templates when they are set up.



How to play messages in Acarda Outbound using a voice modem

When using a voice modem card as the dialing device it is possible to configure Acarda Outbound to play a pre-recorded message when you are using a TAPI compatible voice modem as the dialing device.

The usual setting when dialing out with modems is to have the device auto-hang up a few seconds after it has dialed the telephone number. In that way it simply acts as a speed dialer and you pick up the call with your normal headset/telephone. However, if you want to play voice files through your modem, you need to keep the modem in the call and not auto-hang up until the end. This allows you, if desired, to play a pre-recorded voice message, for example to voicemail, after doing so click the hang up button to disconnect the call. To change the auto-hang up setting follow these steps:

1. In the solo edition of Acarda Outbound, first click on the Administration tab and then the Setup tab. In the team edition, open Acarda Outbound Manager and click on the Setup tab.

2. In the Setup group of icons click on the Settings icon.

3. In the left sidebar you should default to the correct location, the Agent Display then Agent Settings. In the Agent Settings panel there are four sub-panels, the last one called Call Automation consist of two check boxes. The first check box is called Automatically Hang up after Dialing. This is the one to uncheck if you want to play voice messages through a modem.


You need to prepare your voice message. Write out the script ahead of time and practice speaking it. Then record the message in a format that you modem supports. Usually the format will be a wav file of 8000 Hz sampling rate, 16 bits, mono. Any recording tool should be fine as long as you can set the correct format and save as a wav file. You can download our free tool, Acarda WavRecorder, from our website,

At present you can only have one pre-recorded message and it must have the file name and location of: “C:\Program Files\Acarda\Acarda Outbound\message.wav”. Future releases should improve this and give multiple recorded message file options. So take your recorded wav file and rename it to message.wav and copy it into the “C:\Program Files\Acarda\Acarda Outbound\” folder. For the team edition this file should be located on the agent computers.

Now when you have dialed out with through your TAPI voice modem you will be able to click on the Action button and then select Play Message. If you need to stop during the message you can click Stop Message.